Patio Nest Chair Pair Covers: Measure Curves, Nested Footprints, Gaps, and Feet

Nest chairs are designed to overlap into a compact pair, but curved shells, arms, seats, cushions, offset feet, and the gap between frames can create a complex shared profile. A custom patio nest chair pair cover needs measurements from the exact nested arrangement so the cover does not pull the chairs together or leave a broad water-catching pocket.

Place both chairs on a level surface, remove loose accessories, dry the frames and cushions, and nest them only as the furniture maker intends. Do not force misaligned frames or use fabric straps to keep unstable chairs together. If the pair is heavy or awkward, use a second person to position and cover it.

Define the Repeatable Nested Position

Label the front and rear chair and photograph how their seats, backs, arms, and legs overlap. Mark the normal stopping point so the pair is nested to the same depth every time. A small positional change can alter total depth, top slope, and foot spacing.

Measure the Shared Outer Envelope

Use How to Measure to record maximum width, depth, and height across both chairs. Take widths at the feet, seat, arms, and upper back. Measure diagonals across the nested footprint to reveal skew rather than assuming the pair is centered.

Trace the Curved Back Profile

Record the highest back point, shoulder width, top radius, front-to-back arc, and the height where the curve changes. A dimensioned side photo or flexible profile template can clarify a deep shell. Avoid measuring along fabric cushions when the rigid frame defines the cover shape.

Map Arms, Seats, and Overlap Gaps

Measure arm projection, seat-front height, cushion thickness, and the gap between the two frames. Note where one chair passes under or beside the other. The finished cover should clear those transitions without being pulled into an unsupported cavity.

Record Every Foot and Base

Number the feet or continuous bases on both chairs and measure their combined outside footprint. Document splayed legs, glides, rockers, swivel bases, and floor clearance. Confirm the nested pair is stable; lower closures should never be used to correct rocking or misalignment.

Decide Whether Cushions Stay

List each seat pad, back cushion, head pillow, and tie that remains. Dry and position cushions consistently. If they are stored indoors, measure and photograph the bare nested frames. Do not alternate configurations under the same fitted cover.

Plan Support and Drainage

Identify the natural high point along the paired backs and the intended runoff direction. Avoid pulling fabric tightly across a large unsupported gap. Use only a stable, furniture-safe support method, and keep the lower hem above standing water on the terrace.

Choose Fabric for Sculptural Curves

Compare flexibility, water performance, UV resistance, abrasion, cleaning, and finished weight on Our Fabrics. Explore Patio Furniture Covers and Custom Covers. Curved nested forms benefit from clear seam placement and manageable material.

Set a Simple Covering Routine

Add an orientation label for the taller chair and lower the cover from the back toward the feet. Check that no buckle catches inside the nesting gap. Remove the cover completely before separating or using the chairs, then store it clean and dry.

Prepare the Nest-Chair Pair Brief

Send nested-position photos, multi-height widths, overall depth and height, back curves, arms, gaps, cushions, foot map, hem clearance, drainage plan, and closure preferences. Review the Patio Nest Chair Pair Cover for the intended arrangement.

Frequently Asked Questions

Can I measure each chair separately?

Individual dimensions help, but the decisive measurements come from the two chairs in their exact stable nested position.

Should the cover pull the chairs tightly together?

No. Nest the chairs correctly first. The cover and its closures should not act as a structural clamp.

Can cushions remain between the nested frames?

Only when the furniture maker permits it and the cushions are dry, stable, and included in every measurement and photo.

Turn the Measurements Into a Production-Ready Brief

A nest-chair pair is one covered object only after its two frames are placed consistently. The shared envelope, curved-back stations, overlap gaps, cushion decision, and all foot locations give CoversForge the detail needed to evaluate fit around the compact stored form. Mark the chair order on the measurement sketch so the pair can be rebuilt correctly after cleaning or seasonal use. Request a Quote when the measurements and photographs are ready.